Filter
Top Products
WATER FILL VALVE (KA7E ONLY)
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove Right Side Cover.
2. Shut off water supply to oven.
3. Disconnect water hose into oven water fill valve.
4. Disconnect wires to water fill valve.
5. Remove screws securing water valve to utility
plate.
KA7E - CURRENT CONSTRUCTION
6. Disconnect hose connected to outlet of water
valve.
7. Reverse procedure to install.
WASH PUMP (KA7E ONLY)
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove Right Side Cover.
2. Disconnect wires from wash pump.
KA7E - PREVIOUS CONSTRUCTION
3. Remove screws securing pump to bracket.
4. Loosen both hose clamps.
Fig. 91
5. Pivot pump and pull out of oven.
Fig. 92
6. Reverse procedure to install.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
F25294 Rev. A (0412) Page 28 of 72