Filter
Top Products
Fig. 36
6. Work lamp with wires out of lamp brackets. Wires
can not be removed from lamp.
Fig. 37
7. Install and tighten insulators evenly to prevent
damage.
8. Reverse procedure to install.
FAN MOTORS ASSEMBLY
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove
Right Side Cover and Fan Cover.
2. Remove wing nut securing each fan blade. Nut is
left hand thread, turn clockwise to remove.
3. Remove both fan blades.
Fig. 38
4. Remove washer from both shafts.
Fig. 39
5. Remove C clip from both shafts.
Fig. 40
6. Unscrew both fan mounting nuts.
NOTE: Check condition of o-ring on fan mounting nut
and replace if necessary.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
Page 15 of 72 F25294 Rev. A (0412)