Filter
Top Products
Fig. 141
9. KA7EM only:
A. On the opposite side of oven, remove six
nuts securing the blank switch cover plate
and work the plate from oven.
B. Remove two nuts securing blank overlay
cover plate and its retaining plate.
C. Install the blank switch cover plate and
blank overlay cover plate on the opposite
side of where removed.
MODEL KA7EM
D. From front of oven, remove drain handle
from the drain control linkage assembly
(manual grease/sump drain).
E. Remove drain control linkage assembly
from drain valve and work from oven.
1) Remove drain control lever from
linkage assembly.
2) Re-install drain control lever near the
end of linkage assembly. See picture
23921 below.
3) Remove bushing from the front of
oven.
KA SERIES ELECTRIC ROTARY OVENS - APPENDIX
Page 71 of 72 F25294 Rev. A (0412)