BOTTOM VIEW SHOWN
4. Remove screws securing water fill valve to utility
plate.
5. Remove screws securing drain manifold to utility
plate and utility plate to frame.
6. Current construction - Remove strain relief nuts
securing chemical-in and grease-out hoses.
A. Remove hoses from strain relief fittings (pull
hoses through fittings but leave connected
to machine).
CURRENT CONSTRUCTION
7. Previous construction - Remove chemical-in and
grease-out hoses from 45 degree strain relief
fittings.
PREVIOUS CONSTRUCTION
Fig. 5
8. Discard original utility plate, saving screws.
9. Slide mounting bracket off water fill valve.
Fig. 6
10. Reinstall mounting bracket to water fill valve
(rotated as shown).
KA SERIES ELECTRIC ROTARY OVENS - GENERAL
F25294 Rev. A (0412) Page 6 of 72