Filter
Top Products
KA7E - PREVIOUS CONSTRUCTION SHOWN
5. Remove four screws securing motor and speed
reducer to gearbox. Torque screws to 22 inch lbs.
on reassembly.
Fig. 114
6. Pull motor away from speed reducer and lay it
aside.
Fig. 115
7. Pull speed reducer away from gearbox and lay it
aside.
Fig. 116
8. To remove gearbox, manually rotate worm gear
to position crank arm to point toward the side with
the interior light (or away from the motor).
Fig. 117
9. Remove screws securing gasket bracket and
gasket.
NOTE: Replace washers and gasket with new ones
on reassembly.
Fig. 118
NOTE: Gasket bracket may not be able to be
removed until gear box mounting screws are
removed.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
F25294 Rev. A (0412) Page 34 of 72