Filter
Top Products
6-6 SERVICE
P/N 0420057_B
REPLACING SINGLE PANE FRONT
GLASS (Requires more than one person.)
1. Raise the front glass to open completely.
2. Loosen all set screws along the inside bottom
of the glass clamp.
Note: All cylinders do not have to be removed to
remove the glass
IMPORTANT
When reinstalling glass, be certain that:
1. Gasket is on glass evenly.
2. Glass bottom is fully in retainer.
3. When set screws are tightened, glass is firmly
held in place by the glass clamps.
Set Screw Locations
Once set screws are loose, the glass and
glass clamp have NO support or retain-
ers. Support the front glass at all times
until the top glass clamp and set screws
are secured, or glass is removed.
WARNING
!
Gasket
Fully Engage Glass
in Clamp