Cornelius R-134A Beverage Dispenser User Manual


 
3
312027000
GENERAL INFORMATION
IMPORTANT: To the user of this manual - This manual is a guide for installing, operating, and main-
taining this equipment. Refer to the Table of Contents for page location for detailed information per-
taining to questions that arise during installation, operation, service, or maintenance of this
equipment.
GENERAL DESCRIPTION
This section gives the Unit description, theory of operation, and design data for the five and six-flavor Ventures
Post-Mix Dispensers with Built-In Cold Carbonators (hereafter referred to as Units).
This Unit must be installed and serviced by a qualified Service Person. This Unit contains no User serviceable
parts.
UNIT DESCRIPTION
The Units are compact with high-impact and corrosion-resistant moulded lower housings and may be island-
mounted or installed on a front or rear counter. Their refrigeration assemblies are the 1/3 H.P. drop-in type that
can be easily removed for service and maintenance. The Units are equipped with built-in cold carbonators with
their carbonated water tanks located inside the Units lower housings water tanks. Adjustable syrup flow
regulators, located on the electrically operated dispensing valves, are easily accessible to control water-to-syrup
Ratio of the dispensed product.
Installation of the Unit on a countertop, installation of LOOSE-SHIPPED PARTS, connection of plain water and
syrup supplies, adjustment of CO
2
regulators, filling water tank with water, and plugging the Unit power cord into
an electrical outlet is all that is required for operation.
NOTE: Optional 4-inch Legs (P/N 314744000) that will elevate the Unit 4-inches above the countertop
are available. When ordering legs, order a quantity of four.
CAUTION: Before shipping, storing, or relocating this Unit, the syrup systems must be
sanitized and all sanitizing solution must be purged from the syrup systems. All water must
also be purged from the plain and carbonated water systems. A freezing ambient
environment will cause residual water in the Unit to freeze resulting in damage to internal
components.
FIGURE 1. VENTURE SIX-FLAVOR POST-MIX DISPENSER