Filter
Top Products
MAINTENANCE
CAUTION:
OVEN DOOR
• Do not place excessive weight on or
stand on an open oven door. This
could cause the range to tip over,
break the door, or injure the user.
• Do not attempt to open or close door
or operate oven until door is properly
replaced.
• NEVER place fingers between hinge
and front oven frame. Hinge arms are
spring mounted. If accidentally hit, the
hinge will slam shut against oven frame
and could injure your fingers.
TO REMOVE:
1. When cool, open the oven door to the
first stop position (opened about four
inches).
2. Grasp door at each side. Do not use the
door handle to lift door.
3. Lift up evenly until door clears hinge
arms.
TO REPLACE:
1. Grasp door at each side.
2. Align slots in the door with the hinge
arms on the range.
3. Slide the door down onto the hinge
arms until the door is completely seated
on the hinges. Push down on the top
corners of the door to completely seat
door on hinges. Door should not appear
crooked.
NOTE: The oven door on a new range may
feel “spongy” when it is closed. This is
normal and will decrease with use.
20
CAUTION:
OVEN WINDOW
TO PROTECT THE OVEN DOOR
WINDOW:
1. Do not use abrasive cleaning agents such
as steel wool scouring pads or pow-
dered cleansers as they may scratch the
glass.
2. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
3. Do not close the oven door until the
oven racks are in place.
Scratching, hitting, jarring or stressing the
glass may weaken its structure causing an
increased risk of breakage at a later date.
LEVELING LEGS
• Be sure the anti-tip bracket secures
one of the rear leveling legs to the
floor. This bracket prevents the range
from accidentally tipping.
ANTI-TIP BRACKET
LEVELING LEG
ANTI-TIP BRACKET
LEVELING LEG
The range should be leveled
when installed. If the range
is not level, turn the plastic
leveling legs, located at
each corner of the
range, until
range is level.
ELECTRICAL
CONNECTION
Appliances which
require electrical
power are equip-
ped with a three-prong grounding plug
which must be plugged directly into a prop-
erly grounded three-hole 120 volt electrical
outlet.
Always disconnect power to appliance before
servicing.
The three-prong grounding plug offers pro-
tection against shock hazards. DO NOT
CUT OR REMOVE THE THIRD
• Disconnect power to range before
replacing light bulb.
• Use a dry potholder to prevent pos-
sible harm to hands when replacing
bulb.
• Make sure bulb is cool before touching
bulb.
• Do not touch hot bulb with a damp
cloth as this may cause the bulb to
break.
TO REPLACE OVEN LIGHT BULB:
1. When oven is cool, hold bulb cover in
place, then slide wire retainer off cover.
NOTE: Bulb cover will fall if not held in
place while removing wire retainer.
2. Remove bulb cover and light bulb.
3. Replace with a 40 watt appliance bulb.
4. Replace bulb cover and secure with
wire retainer.
5. Reconnect power to the range. Reset
clock.
BULB COVER
WIRE
RETAINER
CAUTION:
OVEN LIGHT
GROUNDING PRONG FROM THE
POWER CORD PLUG.
If an ungrounded, two-hole or other type
electrical outlet is encountered, it is the
personal responsibility of the appli-
ance owner to have the outlet re-
placed with a properly grounded
three-hole electrical outlet.