Jenn-Air T2 Range User Manual


 
8
SETTING CLOCK CONTROLLED
OVEN COOKING BEEPS:
1. Press Cook Time and Stop/Clear
pads at the same time and hold for
several seconds.
A single beep will sound.
Display will show the indicator word
COOK and the current option – 1, 2,
or 3.
2. Press the appropriate number pad (1, 2,
or 3) to select the option you wish. The
current time of day will reappear in the
display after four seconds.
CANCEL CLOCK DISPLAY
If you prefer that the time of day not be
displayed when the oven is not operating:
1. Press Clock and Stop/Clear pads at
the same time and hold for several sec-
onds. The time of day will disappear in
the display.
2. Press Clock pad to briefly recall the
time of day, if desired. The time of day
will appear in the display for four sec-
onds.
TO RESTORE:
Press the Clock and Stop/Clear pads at
the same time and hold for several seconds.
The time of day will reappear in the display.
AUTOMATIC OVEN TURN
OFF/SABBATH MODE
The oven will automatically turn off after 12
hours, if you accidentally leave it on. You
may deactivate this feature, if desired.
TO ELIMINATE 12 HOUR TURN
OFF:
1. Press the Clock pad and hold for several
seconds until “12” appears in the display.
The indicator word TIME will flash in the
display.
2. Press any number pad until 8888 appears
in the display. Current time of day will
reappear after four seconds.
TO RESTORE:
Press the Clock pad and hold for several
seconds until 8888 appears. Press “1” num-
ber pad. “12” will appear briefly in the
display followed by the current time of day.
OVEN TEMPERATURE
ADJUSTMENT
If you think the oven should be hotter or
cooler, you can adjust it yourself. To decide
how much to change the oven tempera-
ture, set the temperature 25° F higher or
lower than the temperature in your recipe,
then bake. The results of the “test” should
give you an idea of how much to adjust the
temperature.
TO ADJUST THE OVEN TEMPERA-
TURE:
1. Press the Bake pad.
2. Enter 550° by pressing the number pads
“5, 5, 0”.
3. Press and hold the Bake pad for several
seconds until 0° appears in the display.
4. Press any number pad to change the
temperature. Each time a pad is pressed,
the temperature changes by 5° F.
Press repeatedly to reach +35° F.
Continue pressing to reduce the tem-
perature up to -35° F.
If the oven temperature was previ-
ously adjusted, the change will be
displayed. For example, if the oven
temperature was reduced by 15°, the
display will show -15°.
5. When you have made the adjustment,
press the Stop/Clear pad and the time
of day will reappear in the display. The
oven will now bake at the adjusted tem-
perature.
NOTE: Do not change the temperature
setting more than 10° at a time before
testing the oven.
It is not necessary to readjust the oven
temperature if there is a power interrup-
tion. This adjustment will not affect broil or
clean temperatures.
PILOTLESS IGNITION
Your range is equipped with pilotless igni-
tion. With this type of ignition system, the
gas automatically shuts off and the oven will
not operate during a power failure.
A lighted match will not light the oven
burner. No attempt should be made to
operate the oven during a power failure.
OVEN FAN
A convection fan is used to circulate hot air
in the oven when the convection feature is
selected. It automatically turns on 5 min-
utes after the Convect Bake pad is pressed
and will turn off when Convect Bake is
canceled.
NOTE: The convection fan will automati-
cally stop whenever the oven door is
opened.