Filter
Top Products
17
2 Preparing and using your IMPRESSA for the first time
E When a coffee speciality has been prepared for the first time,
it is possible that
FILL BEANS is shown on the display as
the grinder has not yet been completely filled with coffee
beans. In this case prepare another coffee speciality.
Your IMPRESSA no longer has to be descaled if you are using CLARIS
filter cartridges.
@ You can also try out the ‘Insert filter’ operation online. Visit the
Knowledge Builder at www.jura.com.
E Perform the ‘Insert filter’ operation without interruptions. This
will ensure that your IMPRESSA always produces at its best.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears on
the display.
g T Turn the Rotary Switch until FILTER - is displayed.
k T Press the Rotary Switch to enter the programme item.
NO -
g T Turn the Rotary Switch until YES w is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
INSERT, the maintenance button c lights up.
T Close the cover of the Rotary Switch.
T Remove the CLARIS filter cartridge from the Welcome Pack.
T Remove the water tank and empty it.
T Lift the cartridge holder and insert the filter cartridge into
the water tank, applying slight pressure.
T Close the cartridge holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert.
Using and activating
filter