Filter
Top Products
45
6 Maintenance
Precondition: READY / CLEAN is displayed and the maintenance
button c lights up.
c T Press the maintenance button.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout and the frother.
c T Press the maintenance button.
CLEANING, water flows from both coffee spouts.
The process is interrupted,
ADD TABLET.
T Open the cover of the filler funnel for pre-ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
c T Press the maintenance button.
CLEANING, water flows from both coffee spouts several
times.
The process is interrupted –
EMPTY TRAY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The cleaning operation is now complete. The IMPRESSA is
ready for use again.
You can initiate the ‘Cleaning the machine’ operation manually.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
k T Press the Rotary Switch to enter the programme item.
C–CLEANING
g T Turn the Rotary Switch until CLEAN is displayed.
k T Press the Rotary Switch.
EMPTY TRAY
T Close the cover of the Rotary Switch.
T Continue with the second prompt to take action (indi-
cated by a T), as is described under ‘Cleaning following a
prompt’.
Cleaning following a
prompt
Manual cleaning