Filter
Top Products
24
3 Familiarising yourself with the control options
Example: Proceed as follows to to prepare a strong cup of coffee.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
T Place a cup under the coffee spout.
g T Turn the Rotary Switch until
STRONG is displayed.
o T Press the Coffee button for as long as
STRONG is dis-
played.
1 COFFEE / STRONG.
The pre-set amount of water flows into the cup. Preparation
stops automatically.
READY appears on the display.
T Close the cover of the Rotary Switch.
Example: Proceed as follows to prepare a
110 ML cup of coffee.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
T Place a cup under the coffee spout.
o T Press the Coffee button.
The grinding operation starts.
1 COFFEE and the coffee
strength is then briefly displayed.
g T Turn the Rotary Switch during the brewing operation until
110 ML is displayed.
The set amount of water flows into the cup. Preparation
stops automatically.
READY appears on the display.
T Close the cover of the Rotary Switch.
It is easy to make permanent settings for the amount of water for all
coffee and milk specialities as well as hot water according to the cup
size. As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of water
will be dispensed.
The permanent settings for adapting the amount of water to to the
cup size for all coffee and milk specialities as well as hot water follow
this model.
Example: To make permanent settings for the amount of water for
an espresso, proceed as follows:
Precondition:
READY is displayed.
Changing the coffee
strength before preparation
Changing the amount of
water during preparation
Adjusting the default
amount of water to
suit the cup size