Filter
Top Products
39
5 Permanent settings in programming mode
g T Turn the Rotary Switch until UNIT ON appears.
k T Press the Rotary Switch to enter the programme item.
--:--
g T Turn the Rotary Switch until 07:00 is displayed.
k T Press the Rotary Switch to confirm the hour setting.
g T Turn the Rotary Switch until
07:30 is displayed.
k T Press the Rotary Switch to confirm the minute setting.
OK appears briefly on the display to confirm the setting.
UNIT ON
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
READY
T Close the cover of the Rotary Switch.
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after a pre-set period has
elapsed following the last use of the machine.
E The programmable switch-off time can be adjusted between
0.5 and 15 hours or deactivated.
Example: Proceed as follows to change the automatic switch-off
time from
1 HRS to 2 HRS.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
OFF AFTER is displayed.
k T Press the Rotary Switch to enter the programme item.
1 HRS
f T Turn the Rotary Switch until 2 HRS is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
OFF AFTER
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
Automatic switch-off