Filter
Top Products
40
5 Permanent settings in programming mode
You can change the unit of the amount of water from ‘ml’ to ‘oz’ and
the time format to ‘24 HRS’ or ‘AM/PM’ .
Example: To change the unit for the amount of water from
ML to
OZ, proceed as follows.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
DISPLAY is displayed.
k T Press the Rotary Switch to enter the programme item.
ML/OZ
E To change the time format, turn the Rotary Switch until
24H/AM PM is displayed.
k T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
ML/OZ
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
DISPLAY
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
The language of your IMPRESSA is set with this programme item.
Example: To change the language from
ENGLISH to DEUTSCH,
proceed as follows.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
LANGUAGE is displayed.
Unit amount of water /
Time format
Language