Filter
Top Products
35
5 Permanent settings in programming mode
With the BUTTONS programme item you can enter individual set-
tings for all coffee and milk specialities as well as hot water.
The following permanent settings can be entered for coffee and
milk specialities and hot water:
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk of one
cappuccino from
14 SEC to 20 SEC, the amount of water from
60 ML to 50 ML and the coffee strength from NORMAL to
STRONG.
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
BUTTONS is displayed.
k T Press the Rotary Switch to enter the programme item.
SELECT BUTTON
Products
5 Permanent settings in programming mode
Product Amount Coffee strength Temp.
1 espresso
25 ML – 240 ML MILD, NORMAL,
STRONG
NORMAL, HIGH
2 espressi 25 ML – 240 ML
(per cup)
–
NORMAL, HIGH
1 coffees 25 ML – 240 ML MILD, NORMAL,
STRONG
NORMAL, HIGH
2 coffees 25 ML – 240 ML
(per cup)
–
NORMAL, HIGH
Cappuccino Amount of milk:
3 SEC – 120 SEC
Amount of water:
25 ML – 240 ML
MILD, NORMAL,
STRONG
NORMAL, HIGH
Milk foam 3 SEC – 120 SEC ––
Hot water
25 ML – 450 ML ––