Filter
Top Products
42
6 Maintenance
Your IMPRESSA has the following integrated maintenance pro-
grammes:
Z Rinse machine
Z Filter change
Z Clean machine
Z Descale machine
Z Rinse frother
Z Clean frother
E Clean or descale the machine or change the filter whenever
the appropriate indicator lights up.
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
You should proceed as follows:
Z Empty the coffee grounds container and the drip tray. Rinse
them with warm water.
Z Rinse the water tank with clean water.
Z Dismantle and rinse the frother (See Chapter 6 ‘Mainte-
nance – Rinsing the frother’).
Z Wipe the surface of the machine with a damp cloth.
When the IMPRESSA is switched on, a prompt to perform a rinse
operation automatically appears after heating. When the IMPRESSA
is switched off, each spout which was used for preparation is
rinsed.
You can initiate the rinse operation manually at any time.
Precondition:
READY is displayed.
T Place a receptacle under the coffee spout.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
k T Press the Rotary Switch to enter the programme item.
C–CLEANING
g T Turn the Rotary Switch until RINSE is displayed.
Maintenance tips
Rinse machine
6 Maintenance