Filter
Top Products
25
3 Familiarising yourself with the control options
T Place an espresso cup under the coffee spout.
i T Press and hold the Espresso button.
1 ESPRESSO appears on the display.
i T Hold the Espresso button down until
ENOUGH
COFFEE ? appears.
i T Release the Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
T Press any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically.
OK appears briefly on the
display. The set amount of water for an espresso will be per-
manently stored.
READY appears on the display.
E You can alter these settings at any time by repeating the
above procedure.
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. You can navigate through the easy-tounderstand
programme steps and make permanent settings by simply turning
and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Permanent settings in
programming mode
Programme item Sub-item
Explanation
RINSE
C–CLEANING,
FILTER (only when the
filter is activated),
CLEAN,
C–RINSE,
DE-SCALE (only when
the filter is not activated),
CLEAN
T Select the desired maintenance pro-
gramme.
If no action is taken, programming mode is
exited automatically after approx. five sec-
onds.
BUTTONS
SELECT BUTTON
T Select your settings for the coffee and
milk specialities and hot water.
FILTER - YES w
NO -
T Indicate whether you operate your
IMPRESSA with or without a CLARIS filter
cartridge.