Filter
Top Products
47
6 Maintenance
T Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a container that holds 500 ml of water. This
may take several minutes.
T Pour the solution into the empty water tank and insert it in
the machine.
AGENT IN TANK, the maintenance button c lights up.
T Remove the frother.
T Place a receptacle (at least 500 ml) under the Connector Sys-
tem
©
.
c T Press the maintenance button.
DE-SCALING
This causes water to flow out of the Connector System
©
sev-
eral times. The maintenance button blinks during the des-
caling operation.
The operation stops automatically,
EMPTY TRAY.
T Empty the receptacle under the Connector System
©
.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
FILL WATER TANK
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold mains water and rein-
sert.
PRESS RINSE, the maintenance button c lights up.
T Replace the frother.
T Place a receptacle under the frother.
c T Press the maintenance button.
DE-SCALING, water flows out of the frother.
The operation stops automatically,
EMPTY TRAY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The descaling operation is now complete. Your IMPRESSA
heats up and is once again ready to use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.