Filter
Top Products
44
6 Maintenance
E You can interrupt filter rinsing at any time. To do this, press
any button.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml. The
IMPRESSA heats up and is once again ready to use.
You can initiate the ‘Changing the filter’ operation manually.
Precondition: The filter is activated and
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
k T Press the Rotary Switch to enter the programme item.
C CLEANING
g T Turn the Rotary Switch until FILTER is displayed.
k T Press the Rotary Switch.
CHANGE
T Close the cover of the Rotary Switch.
T Continue with the second prompt to take action (indi-
cated by a T), as is described under ‘Change following a
prompt’.
After 200 coffee preparations or 80 switch-on rinses, the IMPRESSA
will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
T Use only original JURA care products.
E The cleaning programme only lasts about 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from stockists.
@ You can also try out the ‘clean machine’ operation online. Visit
the Knowledge Builder at www.jura.com.
Manual filter change
Clean machine
CAUTION