Filter
Top Products
49
6 Maintenance
You can initiate the ‘Rinsing the frother’ operation manually.
Precondition:
READY is displayed.
T Place a receptacle under the Easy Cappuccino Frother.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
k T Press the Rotary Switch to enter the programme item.
C CLEANING
T Turn the Rotary Switch until C–CLEANING is displayed.
k T Press the Rotary Switch.
CAPPUCCINO RINSING, the frother is rinsed.
Preparation stops automatically.
READY appears on the
display.
T Close the cover of the Rotary Switch.
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
T Use only original JURA care products.
E The JURA Cappuccino Cleaner is available from stockists.
E The IMPRESSA will not prompt you to clean the frother.
@ You can also try out the ‘Cleaning the cappuccino frother’
operation online. Visit the Knowledge Builder at
www.jura.com.
Precondition:
READY is displayed.
T Remove the milk pipe from the milk carton/bottle or the
milk container.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
k T Press the Rotary Switch to enter the programme item.
C–CLEANING
k T Press the Rotary Switch.
CAPPUCCINO CLEANER
Rinsing the Easy Cappuccino
Frother – starting manually
Cleaning the Easy
Cappuccino Frother
CAUTION