Filter
Top Products
15
2 Preparation
2 Preparation
E You can stop preparation of a speciality coffee, speciality cof-
fee with milk or hot water at any time. Just press any button.
E During the grinding operation you can select the coffee
strength of individual products by turning the Rotary
Switchg: ; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong)
or ;;;;; (extra-strong).
E During preparation, you can change the preset amount of
water by turning the Rotary Switch g or pressing the
‘<’ and
‘>’ buttons.
E You can follow the current status of preparation on the display.
In programming mode you can enable or disable one-off settings
during preparation (see Chapter 4 ‘Permanent settings in program-
ming mode – Enable or disable one-off settings’).
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
Only some of the speciality coffees you can prepare are shown on
the display at any one time. As soon as you turn the Rotary Switch,
more speciality coffees are displayed in the product selector. The
product selector disappears automatically after 5 seconds if no pre-
paration is started.
The following speciality coffees are displayed as standard:
U
‘Espresso’
U
‘Coffee’
U
‘Cappuccino’
U
‘Latte macchiato’
U
‘Hot water’
U
‘1 portion milk’
Additional speciality coffees in the product selector:
U
‘Ristretto’
U
‘2 espressi’
U
‘2 coffees’
U
‘2 ristretti’
Ways of preparing a
beverage