Filter
Top Products
38
5 Maintenance
T Press the ‘Filter’ button.
‘Filter’
T Press the ‘Active’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the tank.
T Place a receptacle under the hot-water nozzle.
T Press the
‘Next’ button.
‘Filter is being rinsed.’, water flows out of the hot-water
nozzle.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchk to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically. The machine heats
up.
‘Please select product:’
Your IMPRESSA is once more ready for use.
E After 120litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Pro Blue filter cartridge is not activated in pro-
gramming mode, you will not be prompted to change the fil-
ter.
Changing the filter