Filter
Top Products
26
4 Permanent settings in programming mode
T Press the ‘Volume’ button.
T Press the
‘<’ or ‘>’ button to change setting for the fill
volume to
‘40ml’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
T Press the
‘<’ or ‘>’ button to change setting for the interval
to
‘40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings (2/6)’/ ‘One-off settings’
you can make the following setting:
U
‘Active’
U
One-off settings can be made during preparation (e.g. coffee
strength or amount of water).
U
‘Inactive’
U
One-off settings cannot be made during preparation. The
product is prepared according to the settings in program-
ming mode (
‘Product settings (2/6)’ / ‘Expert mode’).
Example:Proceed as follows to disable one-off settings during pre-
paration.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’
is displayed.
T Press the
‘One-off settings’ button.
‘One-off settings’
T Press the ‘Inactive’ button.
Enable or disable one-off
settings