Filter
Top Products
34
4 Permanent settings in programming mode
O T Press the P button to exit programming mode.
‘Please select product:’
E The selected background colour only applies on the selection
page of the display showing the speciality coffees.
In the programme item ‘Information (6/6)’ you can view the fol-
lowing information.
U
‘Product counter’: Number of prepared coffee speciality cof-
fees, speciality coffees with milk and hot water
U
‘Maintenance counter’: Maintenance status and number of
maintenance programmes performed (cleaning, descaling,
changing the filter)
U
‘Day counter’: Number of prepared coffee speciality coffees,
speciality coffees with milk and hot water. This counter can be
reset to zero.
U
‘Version’: Software version
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Informa-
tion (6/6)’
is displayed.
T Press the
‘Product counter’ button.
The number of speciality coffees prepared is displayed.
E You can also view the number of products prepared in the pro-
duct selector. To do this, turn the Rotary Switch.
T Press the
‘’ button.
‘Information (6/6)’
E To reset the day counter to zero, press the ‘Day counter’ but-
ton. Then press the
‘’ button and confirm by pressing ‘Yes’.
O T Press the P button to exit programming mode.
‘Please select product:’
Querying information