Filter
Top Products
44
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water tank’ The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first time –
Filling the water tank’).
‘Empty coffee
grounds
container’
The coffee grounds container is
full. You cannot prepare any
products.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).
‘Empty drip tray’ The drip tray is full. You cannot
prepare any products.
T Empty the drip tray and the coffee
grounds container.
T Clean and dry the metal contacts on
the back of the drip tray.
‘Drip tray not
fitted’
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any
products.
T Fit the drip tray.
‘Please press the
Rotary Switch.’
The IMPRESSA is prompting you
to perform a rinse or continue a
maintenance programme that
was already started.
T Press the Rotary Switch to start the
rinse or to continue the maintenance
programme.
‘Fill bean
container’
The bean container is empty.
You cannot prepare any
products.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
‘Rinse the milk
system’
The IMPRESSA is prompting you
to rinse the milk system.
TPress the Rotary Switch to start rinsing
the milk system.
‘Please select
product:’
is
displayed.
The c symbol is
also displayed.
The IMPRESSA is prompting you
to perform a maintenance
programme.
T Press the P button to view the list of
maintenance programmes (
‘Maintenance
status (1/6)’
). By referring to the bar you
can see which maintenance programme
is due. When the bar is completely filled
with red, your IMPRESSA will prompt you
to perform the appropriate maintenance
programme.
‘Not enough
ground coffee’
There is insufficient ground
coffee in the machine; the
IMPRESSA stops the operation.
T The next time you prepare a beverage,
add more ground coffee (see Chapter 2
‘Preparation – Ground coffee’).