Filter
Top Products
23
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Programme item Sub-item Explanation
‘Maintenance status
(1/6)’
‘Clean’
,
‘Descale’ (only if filter is
not activated),
‘Change the filter’ (only
if filter is activated),
‘Rinse the coffee system’,
‘Clean the milk system’
T Start the required maintenance pro-
gramme here.
‘Product settings (2/6)’ ‘Expert mode’,
‘product selector’,
‘One-off settings’,
‘Lock/enable’
T Select your settings for speciality coffees
and hot water.
T Deactivate the product selector view.
T Specify whether or not to allow one-off
settings during preparation.
T Enable or disable individual products.
‘Maintenance settings
(3/6)’
‘Filter’,
‘Water hardness’ (only if
filter is not activated),
‘Switch-on rinse’,
‘Rinse the milk system’
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Pro
Blue filter cartridge.
T Adjust the water hardness.
T Change the settings for the switch-on
rinse and milk system rinse.
‘Machine settings
(4/6)’
‘Save energy’,
‘Switch off after’,
‘Units’,
‘Factory setting’
T Select an energy-saving mode.
T Set the time after which the IMPRESSA
should switch off automatically.
T Select the unit for the amount of water.
T Reset the permanently set values of all
products to the factory settings.
‘Machine settings (5/6)’ ‘Choose language’,
‘Display’,
‘Colour scheme’
T Select your language and the background
colour for the display.