Filter
Top Products
36
5 Maintenance
After each milk preparation, the IMPRESSA prompts you to rinse the
milk system.
Precondition:
‘Rinse the milk system’ is displayed.
T Place a receptacle under the cappuccino frother.
k T Press the Rotary Switch.
‘Milk system is being rinsed.’, water flows out of the cappuc-
cino frother.
The rinse stops automatically and
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA Cappuccino Cleaner is available from specialised dealers.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Clean the milk system’ button.
‘Cleaning agent for milk system’
T Pour 250ml of fresh water into a receptacle and add one
capful of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk
Foamü or Milkz position.
T Place another receptacle under the cappuccino frother.
T Press the
‘Next’ button.
‘Milk system is being cleaned.’, water flows out of the cap-
puccino frother.
‘Water for cleaning milk system’
T Rinse the receptacle thoroughly, fill it with 250ml of fresh
water and immerse the milk pipe in the water.
Rinsing the cappuccino
frother
Cleaning the cappuccino
frother
CAUTION