Filter
Top Products
27
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Product settings (2/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
One-off settings cannot now be made during preparation.
In the programme item
‘Product settings (2/6)’/ ‘product selector’
you can make the following setting:
U
‘Active’
U
Product selector view is active and can be started by turning
the Rotary Switch g when the IMPRESSA is ready for use.
U
‘Inactive’
U
Product selector view is inactive.
Example:Proceed as follows to disable product selector view.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’
is displayed.
T Press the
‘product selector’ button.
‘product selector’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Product settings (2/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Product selector view can now no longer by started by tur-
ning the Rotary Switch.
Enabling and disabling
product selector view