Filter
Top Products
INSTALLATION
Install your oven by following these four simple steps:
Step I: Remove all packing material and accessor_es_ Then remove the protection sheet on wrapper.
Step 2: Place the oven in the level location of your choice, but make sure there is at least one inch of
space on the top and at the rear for proper ventilation, Top ot the oven should be kept clear and
the plastic feet must be kept on the oven so there is air flowventilation. The exhaust vem._ are
at the mar and top of the oven. "DO NOT place any objects such as books, papers, or
cooking accessories over the top of the exhaust vents.;' Blocking the veins can damage {he
oven..
Step 3:
Step 4:
NOTE: '
Plug your oven into a Standard 120volt household outlet. Be sure the electrical circuit is at least
15 amperes and that your microwave/convection oven is the only appliance on the circuit.
When your microwave/convection oven is plugged in for the first time or when power resumes
after a power interruption, the numbers in the display w_ndow will show "0-00" plus the hours and
minutes that have elapsed since the oven wets plugged in or the power was restored., This means
that t_e TIME OF DAY clock must be set, Refer to "Setting TLme of Day" below.
If your oven does not operate properly, unplug the oven from the 120-volt household outlet and
then plug it back in..
This unit is not designed for 50 Hz or any circuit other than a 120 volt/60 Hz AC circuit.
SETTING TIME OF DAY
° Touch CLEAR,
*, Touch TIME OF DAY_
° "i'ouch numbers indicating thecorrect time.
, TouchTIME OF DAY°
(Thi_is alsoexplained in the "Easy Use Chart" Time of Day Section on PageIZ)
DIMENSIONS
t hl
Height: 15-3/4"
Width: 24"
Depth: 21 _
Weight: 68 lbs_
i:
li