Filter
Top Products
SECTION 4—MAINTENANCE & LUBRICATION
Clean-Up
1. After use, wash the unit with its own water supply
which should have an anti-rust additive. The res-
ervoir holds approximately three gallons of clear
water and recommended amounts of anti-rust ad-
ditive.
2. Keep the wheel head carriage assembly clean.
Figure 4-1
Refer to Figure 4-2 and 4-3:
Using a chain and cable lubricant, occasionally oil the
chain with a light coating. Chain and cable lube in a
spray can is very effective. Use 30 wt oil on guide rails
and work table rails. Use 90 wt oil on grease fittings
and carriages.
NOTE
The long life of this machine is based on the
quality of maintenance and continued use of
anti-rust additive in the coolant.
24