Filter
Top Products
SAFETY DECALS
To promote safe operation, Locke Turf supplies safety decals on all products manufactured.
Because damage can occur to safety decals either through shipment, use or reconditioning,
Locke Turf will, upon request, provide safety decals for any of our products in the field at no
charge. Contact your authorized Locke Turf dealer for more information.
28
BASIC GRINDER SAFETY PRACTICES TO AVOID
SERIOUS INJURY OR DEATH:
BEFORE OPERATING GRINDER:
READ AND UNDERSTAND OPERATOR'S MANUAL.
ALLOW NO CHILDREN OR UNTRAINED PERSONS
TO OPERATE GRINDER.
KEEP OTHERS AT A SAFE DISTANCE FORM GRINDER.
AVOID REEL INTANGLEMENT OR GRINDER THROWN
OBJECTS OR DEBRIS.
CLEAR ALL LOOSE OBJECTS AND DEBRIS FROM GRINDER.
ALWAYS FULLY SECURE REEL OR BEDKNIFE IN
MOUNTS BEFORE GRINDING.
CHECK FEEL AND BEDKNIFE "IN-FEED" CLEARANCE
BEFORE GRINDING.
AVOID SHATTERING OR FRAGMENTING GRINDING STONE
INTO THROWN OBJECTS FROM TOO MUCH "IN-FEE."
WHEN OPERATING GRINDER:
KEEP GRINDER SAFETY CANOPIES AND STONE
SHIELDS IN PLACE AND IN GOOD CONDITION.
DO NOT OPERATE GRINDER WITH DAMAGED OR
MISSING SAFETY CANOPIES AND SHIELDS.
ALWAYS WEAR SAFETY GLASSES AND HEARING
PROTECTION WHEN GRINDING.
KEEP HANDS CLEAR OR SPINNING REEL AND
GRINDING STONE.
TRAVEL SLOWLY OVER REEL OR BEDKNIFE "HIGH"
AREAS AND FOLLOW ADJUSTING INSTRUCTIONS.
WHEN SERVICING GRINDER:
SHUT-OFF AND LOCK-OUT ELECTRICAL POWER
BEFORE SERVICING GRINDER OR OPENING
ELECTRICAL CONTROL BOX.
USE CARDBOARD TO CHECKFOR PRESSURIZED COOLANT LEAKS.
DO NOT USE HANDS OR SKIN. HIGH PRESSURE LEAK CAN PENETRATE
SKIN AND MUST BE SURGICALLY REMOVED BY A DOCTOR FAMILIAR WITH
THIS INJURY TYPE WITHIN A FEW HOURS TO AVOID GANGRENE OR DEATH
USE EXTREME CARE WHEN INSTALLING NEW GRINDING STONE
TO AVOID CRACKING STONE. DAMAGED STONES COULD CHIP OR
SHATTER CAUSING SERIOUS INJURY TO OPERATOR.
BALANCE AND "DRESS" NEW GRINDING STONES AFTER
REPLACING OLD STONES FOR PROPER GRINDING OPERATION.
WARNING WARNING
KEEP FRONT AND REAR SAFETY CANOPY SHIELDS CLOSED DURING
SPIN GRINDING.
AVOID POSSIBLE THROWN OBJECTS AND BLADE BLADE CONTACT INJURIES.
ADJUST FOR SLIGHT CONTACT BETWEEN REEL BLADE AND GRINDING STONE.
AVOID SHATTERING OR CHIPPING GRINDING STONE INTO THROWN OBJECTS
BY TOO MUCH REEL CONTACT.
SPIN GRINDING:
SPIN, RELIEF AND BEDKNIFE
GRINDING SAFETY PRACTICES
TO AVOID SERIOUS INJURY OR DEATH:
RELIEF GRINDING:
FIRMLY SIT REEL BLADE OR FINGER GUIDE.
AVOID SHATTERING OR CHIPPING GRINDING STONE INTO THROWN OBJECTS
OR METAL CHIPS BY IMPROPER ADJUSTMENTS.
WEAR SAFETY GLASSES AND FULL FACE SHIELD PROTECTION.
THE FRONT SAFETY CANOPY SHIELD IS OPEN DURING RELIEF GRINDING.
WEAR PROTECTIVE (KEVLAR OR CHAIN MAIL TYPE) GLOVES WHEN MANUALLY
INDEXING REEL.
AVOID SERIOUS HAND CUTS OR FINGE SEVERING INJURIES.
KEEP HANDS CLEAR OF REEL AND GRINDING STONE PINCH POINTS WHEN
MANUALLY TURNING REEL.
BEDKNIFE GRINDING:
ADJUST CUPPED GRINDING WHEEL OUTSIDE EDGE TO AVOID MAKING
CONTACT WITH BED BAR OR MOUNTING BRACKET PARTS. AVOID
SHATTERING OR CHIPPING GRINDING STONE INTO THROWN OBJECTS.
WEAR SAFETY GLASSES AND FULL FACE SHIELD PROTECTION.
THE FRONT SAFETY CANOPY SHIELD IS OPEN DURING BEDKNIFE GRINDING.
FOLLOW OPERATOR MANUAL'S GRINDING OPERATION INSTRUCTIONS,
SAFETY PRACTICES AND PRECAUTIONS.
WARNING
HAZARDOUS VOLTAGE
CAN CAUSE SERIOUS INJURY
OR DEATH OF HAND OR ANY PART
OF BODY IS PLACED IN THIS
ELECTRICAL ENCLOSURE.
TURN OFF MAIN POWER AND
LOCK OUT THE DISCONNECT
SWITCH BEFORE OPENING THIS
ELECTRICAL ENCLOSURE.
DO NOT REMOVE OR COVER THIS SIGN