Filter
Top Products
Safety First!
Locke Turf employees are fully aware of the need for
safe operating procedures around all of our equipment.
We hope that you will make a sincere effort to put
safety above all other priorities. The Reel and Bed-
knife Sharpener requires an extra special
There are some features that have been incorporated
into this unit that may not be found on other sharpen-
ers. Take a moment to note some of the les obvious
advantages of your new sharpener.
• Precision manufactured mounting brackets and
the adjustable spin motor mounting decreases
“set-up” time and insures ease of reel unit
mounting and accuracy during the sharpening
process.
• The one (1) horsepower wheel head motor pro-
duces faster sharpening time, with less adjust-
ment to obtain the best possible cutting results.
The parts on your Locke Turf Reel and Bedknife
Sharpener have been specially designed and should
only be replaced with genuine Locke Turf parts.
Should you require parts or service, contact your Locke
Turf dealer. He has trained personnel, parts and the
equipment to carry out all of your service requirements.
Serial Number
The serial number plate is located on the outside right
frame, near the lower left corner. For your conven-
ience, record the serial number and purchase date on
this page. This serial number and purchase date on
this page. This number provides important information
about your sharpener and may be required to obtain
the correct replacement part. Always use the serial
number and model number when corresponding or
ordering parts from your Locke Turf dealer.
Measure of safety awareness. Please read and heed
all of the safety alert information about your sharp-
ener. As the operator of this place of equipment, you
are in complete control. Only you can prevent an
accident from happening.
• The Locke Turf Sharpeners allow a full range of
adaptability.
• All primary points are easily accessible for main-
tenance.
• The pump supply line is equipped with a shut-off
valve to regulate coolant flow.
• The three (3) gallon reservoir maintains more
than adequate coolant flow to provide less heat
build-up during the sharpening process.
• The wheel heads are positioned to provide better
operator visibility.
Your dealer wants you to be satisfied with your new
machine. If for any reason you are not satisified with
the service received, the following actions are sug-
gested:
1. First, discuss the matter with your dealership ser-
vice manager. Make sure they are aware of any
problems you may have and that they have had
the opportunity to assist you.
2. If you still not satisfied, seek out the owner or
General Manager of the dealership and explain
the problem and request assistance.
3. For further assistance beyond that provided by
your dealer, you may contact:
Locke Turf—Customer Service
307 Highway 52E
Opp, AL 36467
Owner Assistance
Getting Acquainted With Your Reel and Bedknife Sharpener
Introduction
Serial Number
Model Number
Date Purchased
Owner’s Name
Address
City State Zip
Phone
Name of Dealership
Dealer’s Name
Address
City State Zip
Phone
Store a copy of the above information in a separate location in case this manual is lost.
4