Filter
Top Products
PROGRAMMING
12
of 90
* “CASH” - CASH COUNTER ROUTINE
This function will show the user the vender historical total cash counted and the resettable cash counted for each
selection for the vender.
Press key number 4 and “CASH”/”######.##” will show on the display where the 8"#” characters are the historical
total cash counters that have been recorded. Note: Leading zeros are not displayed. Example: Display flashes
“CASH”, then “262500”. This is $2625.00 historical total cash. Press key number 2 to scroll to
“CARD”/######.##”, where the 8# characters are the historical card reader cash counters. Note: Leading zeros
are not displayed.
Press key number 2 or 3 to display “COL A1”/”######.##” where the 8"#” characters are the resettable cash
counters for that selection. Note: Leading zeros are not displayed. Pressing key number 2 or 3 at this time will
scroll through the available selection cash counters. Example: Display flashes “COL A1”, then “520.50”. This is
$520.50 resettable cash for selection A1. Press key number 1 to return to “CASH”/”######.##”. Press key
number 1 to return to “CASH”.
Press key number 2 to scroll to the next routine.
* “SALES” - SALES COUNTER ROUTINE
This function will show the user the vender historical total number of vends and the resettable vends counted for
each selection for the vender.
Press key number 4 and “SALES”/”########” will show on the display where the 8"#” characters are the
historical total vend counters that have been recorded. Note: Leading zeros are not displayed. Example: Display
flashes “SALES”, then “1325”. This is 1325 historical vends.
Press key number 2 or 3 to display “COL A2”/”########”, where the 8"#” characters are the resettable vend
counters for that selection. Note: Leading zeros are not displayed. Pressing key number 2 or 3 at this time will
scroll through the available selection vend counters. Example: Display flashes “COL A1” then “145”. This is 145
resettable vends counted for selection A1. Pressing key number 1 will return to “SALES”/”########”. Press key
number 1 to return to “SALES”.
Press key number 2 to scroll to the next routine.
* “PRICE” - PRICE SETTING ROUTINE
This function allows the user to set pricing. When Configuration Code 1 is programmed to “C1 1”, multi-pricing a
price for each selection needs to be set. Note: This routine is lockable when using a data collection device.
Press key number 4 and “PRICE A1” (multiprice) or “SNGPRICE” (single price) will show on the display.
Press key number 4 to set the price on selection A1, “00.00” or current price setting will show on the display.
Press key number 2 or 3 to change the price setting for selection A1.
Press key number 4 to enter the price selected and the display will return to “PRICE A1”.
Press key number 2 to scroll to the next selection you wish to set price. Press key number 4, set the price and
enter the price. Repeat these steps for each selection until all prices are set. Note: In multiprice modes,
selections go “PRICE A1” through “ALL SELS”.
If Configuration Code 1 is programmed to “C1 O”, single price, set “SNGPRICE” as described above. The price
entered for “SNGPRICE” will be set for all selections.
Press key number 1 to return to “PRICE”.
Press key number 2 to scroll to the next routine.