Filter
Top Products
PROGRAMMING
15
of 90
CON 6 - Configuration Switch 6 - Reserved
This code is reserved for future use.
Press key number 2 to scroll to “CON 7”.
CON 7 - Configuration Switch 7 - Save Credit
This code is used to determine how long a credit will be saved.
C7 0 will save the credit for five minutes. CON 7 1 will save the credit indefinitely.
Press key number 4 and “CON 7 #” will be displayed, with the “#” flashing.
Press key number 2 or 3 to scroll between CON 7 0 and CON 7 1.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 7”.
Press key number 2 to scroll to “CON 8”.
CON 8 - Configuration Switch 8 - Force Vend
This code is used to determine escrow to select or escrow to price.
CON 8 0 will set vender to escrow to select and CON 8 1 will set vender to escrow to price.
Press key number 4 and “CON 8 #” will be displayed, with the “#” flashing.
Press key number 2 or 3 to scroll between CON 8 0 and CON 8 1.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 8”.
Press key number 2 to scroll to “CON 9”.
CON 9 - Configuration Switch 9 - Multi Vend
This code is used to allow multiple vends without re-depositing funds.
CON 9 0 will not allow multiple vends and CON 9 1 will allow multiple vends.
Press key number 4 and “CON 9 #” will be displayed, with the “#” flashing.
Press key number 2 or 3 to scroll between CON 9 0 and CON 9 1.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 9”.
Press key number 2 to scroll to “CON 10”.
CON 10 - Configuration Switch 10 - Bill Escrow Inhibit
This code is used to allow last bill that meets or exceeds maximum vend price to be held in escrow.
CON 10 0 will escrow bill and CON 10 1 will not escrow bill (or stack the bill).
Press key number 4 and “CON 10 #” will be displayed, with the “#” flashing.
Press key number 2 or 3 to scroll between CON 10 0 and CON 10 1.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 1 0”.
Press key number 2 to scroll to the next configuration code.
Press key number 1 to return to “CONFIG”.
Press key number 2 will scroll to next routine.