Filter
Top Products
PROGRAMMING
22
of 90
“LIGHTX” - Lighting / P.O.S. Display Control
This function is used to turn the lights (if supported) and P.O.S. Display Message off during selection
blocking period 1. 0 = disable or on; 1 = enable or off.
Press key number 4 and the “#” will start flashing.
Press key number 2 or 3 to scroll between “LIGHT0” and “LIGHT1”.
Press key number 4 with the display showing the setting you wish to use.
Display will return to “LIGHTX”.
Press key number 1 to return to “SELBLCK1”.
Press key number 2 to scroll to “SELBLCK2”.
*”SELBLCK2" - BLOCK SELECTION BANK 2 ROUTINE
This function is a second set used to set selection(s) which will be blocked during certain periods of the day.
Press key number 4 will enter “ENABLEX”.
“ENABLEX” - Blocking Enable Routine.
Set this function using instruction for “ENABLEX” in “SELBLCK1”.
“STRT TIM” - Start Selection Blocking Routine
This function is used to set the day(s) and times to start selection blocking.
Press selection button 4 and “STRT DAY” will show on the display.
“STRT DAY” - Day of Week Start Setting
Set this feature using instructions for “SELBLCK1”, “STRT TIM”, “STRT DAY”.
“STRT HR” - Start Hour and Minute Setting
Set this function using instructions for “SELBLCK1”, “STRT TIM”, “STRT HR”.
“STOP TIM” - Stop Selection Blocking Routine.
This function is used to set the day(s) and times to stop selection blocking.
Press key number 4 and “STOP DAY” will show on the display.
“STOP DAY” - Day of Week Stop Setting
Set this function using instructions for “SELBLCK1”, “STOP TIM”, “STOP DAY”.
“STOP HR” - Stop Hour and Minute Setting
Set this function using instructions for “SELBLCK1”, “STOP TIM”, “STOP HR”.
Press key number 1 to return to “STOP TIM”.
Press key number 2 to scroll to “SELECT”.
“SELECT” - Selection To Be Affected By Blocking
This function is used to set selection(s) which will be blocked during certain periods of the day.
Set this function using instructions for “SELBLCK1”, “SELECT”.
Press key number 1 to return to “SELECT”.
Press key number 2 to scroll to “LIGHTX”.
“LIGHTX” - Lighting / P.O.S. Display Control
This function is used to turn the lights (if supported) and P.O.S. Display Message off during selection
blocking period 2.
Set this function using instructions for “SELBLCK1”, “LIGHT”.
Press key number 1 to return to “SELBLCK2”.
Press key number 2 to scroll to “DISCOUNT”.