Filter
Top Products
PROGRAMMING
14
of 90
* “CONFIG” - MACHINE CONFIGURATION
This function allows the user to access and change the programming of the following machine configuration
settings. Note: This routine is lockable when using a data collection device. If you press key number 4 and the
display shows “LOC”, this means configuration setting changes will not be allowed. If “CON 1” is displayed, then
configuration setting changes will be allowed. “LOC” can only be enabled or disabled through DEX interrogation.
If “CON1” is displayed, the listed settings are available. Note: You must press key number 4 with the
configuration code displayed if you wish to enter the edit mode. The “0” or “1” will be flashing to acknowledge you
are in the edit mode.
IMPORTANT: All machine configuration codes are disabled coming from the factory (CON # 0).
CON 1 - Configuration Switch 1 - Multi-Price Setting Mode
This code is used to enable the single price mode “CON 1 0” or multi-price mode “CON 1 1”.
Press key number 4 and “CON 1 #” will be displayed, with the “#” flashing.
Press key numbers 2 or 3 to scroll between “CON 1 0” and “CON 1 1”.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 1”.
Press key number 2 to scroll to “CON 2”.
CON 2 - Configuration Switch 2 - Optional Features Enable
This code is used to allow (CON 2 1) the following optional features to be displayed and enabled:
“LIGHT”, “DISCOUNT”, “OVERRIDE”, “SELBLCK1”, and “SELBLCK2”.
Press key number 4 and “CON 2 #” will be displayed with the # flashing.
Press key numbers 2 or 3 to scroll between “CON 2 0” and “CON 2 1”.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 2”.
Press key number 2 to scroll to “CON 3”.
CON 3 - Configuration Switch 3 - POS Message
This code is used to disable the point of sale message. CON 3 0 = enabled, CON 3 1 = disabled.
Press key number 4 and “CON 3 #” will be displayed, with the “#” flashing.
Press key numbers 2 or 3 to scroll between “CON 3 0” and “CON 3 1”.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 3”.
Press key number 2 to scroll to “CON 4”.
CON 4 - Configuration Switch 4 - Automatic Viewing of Historical Sales and Cash Accounting,
ERROR or NONE
This code is used to enable viewing of historical sales, historical cash, ERROR or NONE automatically
when the door is opened. To enable automatic viewing option enter “CON 4 1”; to disable enter “CON 4
0”.
At “CON 4 0” ERROR or NONE automatically displays when the door is open.
Press key number 4 and “CON 4 #” will be displayed, with the “#” flashing.
Press key number 2 or 3 to scroll between “CON 4 0” and “CON 4 1”.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 4”.
Press key number 2 to scroll to “CON 5”.
CON 5 - Configuration Switch 5 - Door Switch Reset Status
This code is used to reset all resettable data when the door switch is cycled and at least one data register
is read via the display when set at “CON 5 1” or to reset all resettable data only when the “RESET”
command is received via handheld or portable computer when set at “CON 5 0”.
Press key number 4 and “CON 5 #” will be displayed, with the “#” flashing.
Press key numbers 2 or 3 to scroll between “CON 5 0” and “CON 5 1”.
Press key number 4 with the display flashing the setting you wish to use.
Press key number 1 to return to “CON 5”.
Press key number 2 to scroll to “CON 6”.