Filter
Top Products
PROGRAMMING
17
of 90
*”LANGUAGE” - LANGUAGE ROUTINE
This function is used to set the language that will be used for display messages. Note: This does not change the
menu prompts.
Press key number 4 and the display will show the language currently set in the controller.
Press key number 2 or 3 to scroll through the languages available.
ENGLISH - English ITALIAN - Italian SLOVENE - Slovene
FRENCH - French PORTUGES - Portuguese FINNISH - Finnish
GERMAN - German SPANISH - Spanish NORWEG - Norwegian
With the language you wish to enter showing on the display, press key number 4.
The display will return to “LANGUAGE”.
Press key number 2 to scroll to next routine.
*”TIME” - TIME AND DATE SETTING ROUTINE
This function is used to set the year, month, date, and hour (military 24 hour clock).
Press key number 4 and “ENABLE X” will show on display.
“ENABLEX” - Time and Date Enable Routine
Press key number 4 and ENABLE0 = disabled or ENABLE1 = enabled will show on display.
Press key number 2 to scroll between ENABLE0 and ENABLE1.
Press key number 4 with the display showing the setting you wish to use and display will return to
“ENABLEX”.
Press key number 2 to scroll to “YEAR”.
“YEAR” - Year Setting (00 to 99)
Press key number 4 and the current year setting will show on display.
Press key number 2 or 3 to change the last 2 digits of the year (00 to 99).
Press key number 4 with the display showing the year you wish to use and display will return to “YEAR”.
Press key number 2 to scroll to “MONTH”.
“MONTH” - Month Setting (01 to 12)
Press key number 4 and the current 2 digit month setting will show on display.
Press key number 2 or 3 to change the month (01 to 12).
Press key number 4 with the display showing the month you wish to use and display will return to
“MONTH”.
Press key number 2 to scroll to “DATE”.
“DAY” - Day of Month Setting (1 to 31)
Press key number 4 and the current 2 digit day of month setting will show on display.
Press key number 2 or 3 to change the day of month (1 to 31).
Press key number 4 with the display showing the day you wish to use and display will return to “DAY”.
Press key number 2 to scroll to “HOUR”.
“HOUR” - Hour and Minute Setting (0000 to 2359)
Press key number 4 and the current 4 digit hour and minute setting will be displayed (24 hour).
The hour setting will be blinking to indicate it can be changed. Press key number 2 or 3 to change the
hour setting. Press key number 4 to save and the minute setting will start blinking to indicate it can be
changed. Press key number 2 or 3 to change the minute setting. Press key number 4 will save and
return display to “HOUR”.
Press key number 2 to scroll to “DST”.