Filter
Top Products
PROGRAMMING
18
of 90
“DST” - Daylight Saving Time Setting
This function is used to set the preferred daylight savings time setting.
Press key number 4 will display the current setting.
Press key number 2 or 3 to scroll through the “DST” options listed:
- “OFF”, no daylight savings time changes made.
- “AUSTRAL”, Australian rules - Set forward 1 hour at 1:00 am on the first Sunday in October; Set
backward 1 hour at 1:00 am on the last Sunday in March.
- “EUROPE”, European rules - Set forward 1 hour at 1:00 am on the last Sunday in March; Set
backward 1 hour at 1:00 am on the last Sunday in October.
- “NAMERICA”, North American rules - Set forward 1 hour at 2:00 am on the first Sunday in April;
Set backward 1 hour at 2:00 am on the last Sunday in October.
Press key number 4 with the display showing the setting you wish to use and display will return to “DST”.
Press key number 1 to return to “TIME”.
Press key number 2 to scroll to next routine.
*”LIGHTING” - LIGHTING CONSERVATION CONTROL ROUTINE (Con 2 Must Be Enabled - C2 1)
This function is used to turn the lights off and on during certain periods of the day.
Press key number 4 will enter “ENABLE X”.
“ENABLEX” - Lighting Conservation Control Enable Routine
This function is used to disable Lighting Conservation Control “ENABLE0” (lights will be on at all times) or
enable Lighting Conservation Control “ENABLE1” (lights can be set to turn off).
Press key number 4 and the current “ENABLEX” setting will be displayed.
Press key number 2 or 3 to scroll between “ENABLE0” and “ENABLE1”.
Press key number 4 with the display showing the setting you wish to use.
Press key number 2 to scroll to “STRT TIM”.
“STRT TIM” - Start Lighting Conservation Setting (lights off)
This function is used to set the days and time to start light conservation when “ENABLE 1” is selected.
Press key number 4 and “STRT DAY” will show on the display.
“STRT DAY” - Day to Start Setting
This function is used to set the days of the week to start light conservation.
Press key number 4 and “XXXXXX#” will show on the display, where XXXXXX will be the day of the
week (i.e. MONDAY, TUEDAY, WEDDAY, THUDAY, FRIDAY, SATDAY, SUNDAY, EVRDAY) and #
is 0 = disable, 1 = enable. With the display showing the day you wish to set press key number 4.
The # will start blinking. Press key number 2 or 3 to scroll between “XXXXXX0” and “XXXXXX1”.
Press key number 4 with the display showing the setting you wish to use. Display will return to
“XXXXXX#”.
Press key number 2 to scroll to the next day to set or press key number 1 to return to “STRT DAY”.
Press key number 2 to scroll to “STRT HR”.
“STRT HR” - Start Hour and Minute Setting
This function is used to set the hours to start light conservation (lamps off).
Press key number 4 and “hhmm” will show on the display, where “hh” is the hour (military time) and
“mm” is the minute. “hh” will be blinking, indicating the hour setting may be changed. Press key
number 2 to scroll from 00 to 23. With the display showing the hour you wish to start light
conservation, press key number 4. “mm” will start blinking, indicating the minute setting may be
changed. Press key number 2 to scroll from 00 to 59. With the display showing the minute you wish
to start light conservation, press key number 4. The display will return to “STRT HR”.
Press key number 1 to return to “STRT TIM”.
Press key number 2 to scroll to “STOP TIM”.
“STOP TIM” - Stop Light Conservation Setting (lights on)
This function is used to set the days and time to stop light conservation.
Press key number 4 and “STOP DAY” will show on the display.
“STOP DAY” - Day To Stop Setting
This function is used to set the days of the week to stop light conservation and can be set in the same
manner as Day to Start Setting.