Filter
Top Products
PROGRAMMING
21
of 90
“STRT DAY” - Day of Week Start Setting
This function is used to set the day(s) of the week to start selection blocking.
Press key number 4 and “XXXXXX#” will show on the display, where XXXXXX will be the day of the
week (i.e. MONDAY, TUEDAY, WEDDAY, THUDAY, FRIDAY, SATDAY, SUNDAY, EVR DAY) and #
is 0 = disable, 1 = enable.
With the display showing the day you wish to set press key number 4.
The # will start blinking. Press key number 2 or 3 to scroll between “XXXXXX0” and “XXXXXX1.”
Press key number 4 with the display showing the setting you wish to use.
Display will return to “XXXXXX#’.
Press key number 2 to scroll to the next day to set or press key number 1 to return to “STRT DAY”.
Press key number 2 to scroll to “STRT HR”.
“STRT HR” - Start Hour and Minute Setting
This function is used to set the hours and minutes to start selection blocking.
Press key number 4 and “hhmm” will show on the display, where hh is the hour (military time) and
mm is the minute. “hh” will be blinking, indicating the hour setting may be changed.
Press key number 2 to scroll from 00 to 23. With the display showing the hour you wish to start
selection blocking, press key number 4. “mm” will then start blinking, indicating the minute setting
may be changed.
Press key number 2 to scroll from 00 to 59. With the display showing the minute you wish to start
selection blocking, press key number 4. The display will return to “STRT HR”.
Press key number 1 to return to “STRT TIM”.
Press key number 2 to scroll to “STOP TIM”.
“STOP TIM” - Stop Selection Blocking Routine
This function is used to set the day(s) and times to stop selection blocking.
Press key number 4 and “STOP DAY” will show on the display.
“STOP DAY” - Day of Week Stop Setting
This function is used to set the days of the week to stop selection blocking and can be set in the
same manner as Day of Week Start Setting.
“STOP HR” - Stop Hour and Minute Setting
This function is used to set the hours and minutes to stop selection blocking and can be set in the
same manner as Start Hour and Minute Setting.
Press key number 1 to return to “STOP TIM”.
Press key number 2 to scroll to “SELECT”.
“SELECT” - Selection To Be Affected By Blocking
This function is used to set selection(s) which will be blocked during certain periods of the day.
Press key number 4 and “SELA1#” will be displayed, where # is the current setting for the selection
number displayed. 0 = disabled; 1 = enabled.
Press key number 2 to scroll to the key number setting you desire to change.
Press key number 4 with the key number showing you wish to change (i.e. SELA1#) and the # will start
blinking.
Press key number 2 or 3 to scroll between SELA1 0 and SELA1 1.
Press key number 4 with the display showing the setting you wish to use.
Display will return to SELA1#.
Press key number 1 to return to “SELECT”.
Press key number 2 to scroll to “LIGHT”.