Filter
Top Products
PROGRAMMING
24
of 90
“OVERRIDE” - MANUAL SWITCH OVERRIDE ROUTINE
This function is used to allow a key switch to override some of the settings stored for normal operations.
This function can be programmed to control one or several of the following features: Free Vend Enable,
Selection Blocking, Discount Pricing, and Lighting Control.
Press key number 4 and the display will show “FREE X”.
Press key number 2 or 3 to scroll through the override routines available.
Press key number 1 to return to “OVERRIDE”.
“FREE X” - Free Vend Enable Routine
This function is used to set the vender to free vend. 0 = disable, 1 = enable.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between “FREE 0” and “FREE 1”.
Press key number 4 with the display blinking the setting you wish to use.
Display will return to “FREE X”.
Press key number 2 to scroll to “NO VENDX”.
“NOVEND X” - No Vend (Vend Override) Enable Routing
This function is used to set vender selections to not be allowed to vend and a “NO SALE” message to be
displayed. 0 = disable, 1 = enable.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between NOVEND 0 and NOVEND 1.
Press key number 4 with the display showing the setting you wish to use. Display will return to
“NOVEND X”.
Press key number 2 to scroll to “BLOCKX”.
“BLOCK X” - Selection Blocking Override Routine
This function is used to override “SELBLCK1” and “SELBLCK2” if they are being used. “BLOCK 0” is
disabled, “BLOCK 1” is enabled.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between “BLOCK 0” and “BLOCK 1”.
Press key number 4 with the display blinking the setting you wish to use.
Display will return to “BLOCK X”.
Press key number 2 to scroll to “DISC X”.
“DISC X” - Discounting Override Routine
This function is used to override “DISCOUNT” if it is being used. “DISC 0” is disabled and “DISC 1” is
enabled.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between “DISC 0” and “DISC 1”
Press key number 4 with the display showing the setting you wish to use.
Display will return to “DISC X”.
Press key number 2 to scroll to “LIGHT X”.
“LIGHT X” - Lighting Control Override Routine
This function is used to override “LIGHT’” if it is being used. “LIGHT 0” is disabled and “LIGHT 1” is
enabled.
Press key number 4 and “#” will start flashing.
Press key number 2 or 3 to scroll between “LIGHT 0” and “LIGHT 1”.
Press key number 4 with the display blinking the setting you wish to use.
Display will return to “LIGHT X”.
Press key number 2 to scroll to “REFRIG X”.