Filter
Top Products
Sequence of a time-controlled
cooking programme, Using the
residual heat
The Start time will be shown in the
display up until the heating is switched
on.
During the course of the programme,
you can follow the temperature
increasing in the display until it
reaches the set temperature. A
polyphonic tune will play when the set
temperature is reached.
Then the Time left until the end of the
programme will appear in the display.
The heating in the oven switches off
shortly before the end of the cooking
programme. Residual heat (Energy
saving function) is then used. "Energy
save phase" will appear in the display.
The residual heat in the oven is
sufficient to complete the cooking
process.
The cooling fans continue to run, as do
the hot air fans if a "fan" setting had
been chosen.
At the end of the cooking programme
–
The oven heating switches off.
–
"Programme finished" and the
O
symbol appear in the display.
–
A polyphonic tune will play.
–
The cooling fans will continue to run
for a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the
control panel or in the oven housing
unit.
The fans are sensor-controlled and
will switch off automatically. You can
change this standard default setting.
See "Settings - Cooling fan run-on".
Switch the oven off at the end of the
programme.
Changing or deleting an entered
cooking time
Selecting "Change" brings up all the
options which can be changed.
^
Select the option you want and
change it.
Use the U sensor to delete the entered
times.
If there is a power cut, all data entered
will be deleted.
Operation
32