Filter
Top Products
Clock format
The time of day can be altered from a
24-hour display to a 12-hour display.
Setting the time of day
You cannot set the time of day while
a cooking programme is in progress.
Use + or - to enter the time of day. First
enter the hours and confirm with "OK".
Then enter the minutes and confirm
with "OK".
If there is a power cut, the current time
of day will reappear once power has
been restored. The appliance will store
this data for approx. 200 hours. After
200 hours it will show "12:00" and will
need to be re-set.
Lighting
You can choose between the default
setting of the light coming "On for 15
seconds" and "On".
If you keep the default setting, the
interior lighting will switch off 15
seconds after the start of the cooking
programme. If you touch a sensor, the
light will come on again for another 15
seconds.
If you select "On", the light will remain
on during the entire programme.
Catalyser
The oven is supplied with the catalyser
engaged for all functions.
If the catalyser is set to:
ß On
it will work with all functions.
ß Off next programme only
it will be switched off during the next
programme only.
Cooling fan run-on
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
The fans are sensor controlled, and will
switch off automatically.
You can set the cooling fans to switch
off either when the temperature in the
oven is below approx. 70°C, or after a
period of approx. 25 minutes.
Settings
48