Filter
Top Products
,
The appliance must not be
operated until it has been correctly
installed in its housing unit.
Otherwise it poses an electric shock
hazard.
To ensure adequate ventilation to
the oven once installed:
– do not fit a rear panel into the
housing unit.
– make sure that the shelf on which
the appliance is placed does not
touch the wall.
– do not fit insulation material inside
the housing unit.
When installing the appliance do not
lift it up by the door handle as this
can damage the door.
Turn off the mains electricity supply
to the isolator.
Remove the carry handles at the
sides.
^ Using the screws supplied, fix the
brackets supplied to the right and left
side of the housing unit.
^ Connect the mains cable from the
oven to the isolator.
^ Push the appliance into the oven
housing unit and align it.
Installing the oven
81