Filter
Top Products
Volume
ß Buzzer tones (polyphonic tune)
The volume of the polyphonic tune
can be changed.
ß Keypad tone
Each time a sensor is pressed there
is a beep. The volume of this beep
can be changed or the sound
switched off completely.
To switch off the tone or change the
volume
PPPPGGGM
The volume is represented by a bar
with seven segments. If all of the
segments are illuminated, the volume is
set at maximum volume. If none of the
segments is illuminated, the sound is
switched off altogether.
SpeedLight
ß In use
The SpeedLighting under the angled
fascia panel is switched on whilst the
appliance is in use, but can be
switched off if preferred.
ß In standby mode
The lighting is switched on when the
appliance is switched off, but can be
switched off if preferred.
ß Colour in standby mode
The colour of the Speedlight when
the appliance is switched off can be
changed.
PPPPGGGM
The colour is represented by a bar with
seven segments. If all of the segments
are illuminated, the lighting will be red.
If none of the segments is illuminated,
the lighting will be yellow.
Safety
The system lock prevents the
appliance being switched on
unintentionally, by children for example.
It is deactivated as standard.
It has to be activated in order to use it.
To activate the system lock:
^ Select "System lock
0".
^ Select "Permitted".
^
Switch the appliance off using the K
sensor.
The
1 symbol will appear in the
display, indicating that the system
lock can be used.
Settings
50