Miele DG 1050 Oven User Manual


 
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important notes on its
installation, safety, use and
maintenance. This appliance is not
intended for use by persons
(including children) with reduced
physical, sensory or metal
capabilities, or lack of experience or
knowledge, unless they have been
given supervision or instruction
concerning the use of the appliance
by a person responsible for their
safety.
Please stick the extra data plate for
your appliance supplied with this
documentation in the space
provided in the "After sales service"
section of this booklet.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.
Technical safety
Before connecting the appliance to
the mains supply make sure that
the connection data on the data plate
(voltage and connected load) match
the mains electricity supply. This data
must correspond in order to avoid risk
of damage to the appliance. Consult a
qualified electrician if in any doubt.
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and where
there is any doubt, the household
wiring system should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the appliance to
the mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
Never open the casing of the
appliance.
Tampering with electrical connections
or components is highly dangerous to
the user and can cause operational
faults.
Do not use the appliance if the
cable is damaged in any way. If the
connection cable is faulty it must only
be replaced by a Miele approved ser
-
vice technician to protect the user from
danger.
Warning and Safety instructions
8