Filter
Top Products
Problem Possible cause and remedy
The time of day or
"i2:00" is flashing in
the display.
There has been a power cut.
Confirm the time of day with the OK sensor or reset the
time.
You will have to enter programmed cooking processes
again.
A noise can be
heard after a
cooking
programme.
^
This is not a fault. The cooling fan continues to run for a
while after a programme has finished. When the
temperature has fallen sufficiently, the fan switches off
automatically.
The interior lighting
is not working.
^
Disconnect the appliance from the electricity supply.
^ Turn the lamp cover a quarter turn anti-clockwise to
release it and then pull it downwards to take it out.
^ Replace it with a new halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
^ Refit the lamp cover and turn it clockwise to secure it.
^ Reconnect the appliance to the mains electricity supply.
Cakes and biscuits
are not cooked
properly after
following the times
given in the chart.
– Check that the correct temperature has been set.
– Check whether there has been a change to the recipe.
The addition of more liquid or more eggs makes a
moister mix which would need longer to cook.
Cakes/biscuits are
browning unevenly.
There will always be a slight unevenness. If browning is
very uneven check that the correct temperature was set
and that the correct shelf level was used.
With Conventional heat V the material and colour of the tin
used plays an important role. Light coloured, shiny tins are
less suitable.
Problem solving guide
74