Filter
Top Products
Problem Possible cause and remedy
The door cannot be
opened at the end
of a pyrolytic
cleaning
programme.
Switch the appliance off. If the door lock will still not open
please contact Miele (you cannot open the door if the oven
temperature is above 280 °C).
A fault code
appears in the
display:F+a
number
You can rectify the faults with the following codes yourself:
–
Fault 23: The temperature required for pyrolytic cleaning
was not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault code appears again please contact Miele.
– Fault 32: The door has not locked for the pyrolytic
cleaning process.
Switch the oven off and start the pyrolytic cleaning
process again.
If the fault code appears again call Miele.
– Fault 33: The door lock for the pyrolytic cleaning process
will not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the door will still not open please contact
Miele.
–
Fault 55: Safety switch-off has been triggered.
The appliance will be ready for use again after it has
been switched off and then back on again.
For all other fault codes please contact Miele.
Problem solving guide
75