Filter
Top Products
Display functions
General
The following functions can be selected
or set with the display:
–
the wash program
–
the Delay start time
–
the settings
The following appears in the display
while a program is running:
– the present program step
– the estimated remaining runtime
– any faults or other messages
In order to save energy, the
dishwasher will switch to
Standby-mode within a few minutes if
no program is running and no button
is pressed. After several more
minutes it switches off completely
(see Operating the commercial
dishwasher - Standby).
To turn the commercial dishwasher
back on, press the - button.
Settings menu
The Settings menu allows you to set the
commercial dishwasher to suit your
special requirements.
You can open the Settings menu by
pressing a specific button combination.
For further information see Settings
menu.
The normal functions of the buttons
next to the display are not active with
the Settings menu, allowing you to
select and confirm menu items using
these buttons.
The left and right arrows in the display
indicate that additional selections are
available. You can choose these
selections with the left or right button
below the display.
Use the centre button below the display
to confirm messages or settings and to
switch to the next menu or submenu.
The currently selected setting is
marked with a check
(.
Before using for the first time
19