Filter
Top Products
Delay start
The start time of a program can be
delayed, for instance to take
advantage of cheaper electricity rates
at night. You can delay the start time by
30 minutes to 24 hours. The delay is set
in 30 minute increments.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry if necessary.
Otherwise the detergent could
clump and not rinse out completely.
^ Open the door.
^ Press the - button to turn the
commercial dishwasher on.
The - indicator light will come on.
^ Use the program selector button to
select the desired program.
^ Press the , button.
The last Delay start time will appear in
the display. The , indicator light
comes on.
^
Set the desired Delay start time using
the , button.
If you keep the , button pressed, the
time will increase automatically up to
24:00 h. To start at 30 minutes again,
press the , button twice.
^
Close the door.
If you do not close the door within a few
seconds after you have set the Delay
start time, the program runtime will
appear in the display again. You will
have to set the Delay start time again.
The time starts counting down in
minutes until the program start time.
When the set time is reached, the
program selected will begin
automatically. The in-operation control
light will come on.
Starting a program before Delay start
has elapsed:
A program can be started before the
Delay start time has elapsed. Just do
the following:
^ Open the door.
^ Turn the commercial dishwasher off
with the - button.
^ Switch the machine on again with the
- button.
^
Use the program selector button to
select the desired program.
^
Start the program by closing the
door.
The In-operation indicator light comes
on to show that a program has started.
Additional functions
44