Filter
Top Products
AutoOpen
To improve drying, the door
automatically opens a little at the end of
a program, except for Rinse & Hold,
ProSpeed and Glass no rinse aid (see
Program guide).
With the Universal, Pots & Pans and
Glasses programs, AutoOpen can only
be activated by selecting Extra drying
(see Additional functions - Extra
drying).
You can also deactivate this function.
^
Select the desired setting and press
the centre button to confirm.
,
If you have deactivated the
AutoOpen function but would still
like to open the door at the end of a
program, make sure that you open
the door completely. Otherwise
steam from the commercial
dishwasher could damage the edge
of the countertop because the fan is
no longer running.
Optimizing Standby
A few minutes after the last button is
pressed or a few minutes after the end
of the program the commercial
dishwasher will switch to Standby mode
to save energy. The display and the
indicator lights are switched off and
only the - flashes slowly.
If you do not turn the commercial
dishwasher off when the program has
ended, it will switch off automatically
after several minutes in Standby.
You can also deactivate the Optimizing
standby function. The display and the
indicator lights do not go out, and the
commercial dishwasher turns off 6
hours after the end of the program.
This results in higher energy
consumption.
^ Select the desired setting and press
the centre button to confirm.
If Refill salt, Refill rinse aid or a fault
is displayed, or while a program is
running, the commercial dishwasher
will not switch to Standby mode.
Settings menu
78